Gunson Safety Wire Nut and Bolt Jig Kit - Metric.
Again one of those ingenious tools from the House of Gunson...
To secure a nut with locking wire, you first need to drill through the nut and the bolt.
Drilling straight through the head of the bolt or its shaft is no easy feat, especially when it concerns the somewhat smaller bolts.
This simple jig makes it an extremely easy job!
It is suitable for the following, Metric, sizes:
- M6 x 1.0
- M8 x 1.0
- M8 x 1.25
- M10 x 1.25
- M10 x 1.5
- M12 x 1.5
The nut-jig is suited for those same sizes.
The holes are to be drilled using a 2 mm drill bit which is NOT included.
Gunson Article Number: 77080